Setting MR51e to use Public DHCP addressing mode - Synergis™ Softwire 11.0

Synergis™ Softwire Integration Guide 11.0

series
Synergis™ Softwire 11.0
revised_modified
2020-11-27
category_custom
Guides
Guides > Integration guides
prodname_custom
Synergis > Synergis™ Softwire
vrm_version
11.0

If your network supports DHCP, it is recommended to set your MR51e panels to use Public DCHP addressing model.

Procedure

  1. On the MR51e panel, set S1 (Configuration DIP switches) to '0001'.
    Set DIP Switch 4, 3, and 2 to OFF, and DIP Switch 1 to ON.
  2. Press S2 (Reset Switch).