About the tamper inputs on Axis controllers - Synergis™ Softwire 11.1

Synergis™ Softwire Integration Guide 11.1

Applies to
Synergis™ Softwire 11.1
Last updated
2021-04-06
Content type
Guides > Integration guides
Language
English (United States)
Product
Synergis™ Softwire
Version
11.1

The Axis controller features two tamper inputs that can be monitored in Security Center.

These inputs are:
  • Input Tampered. This input is active when:
    • Input “IN3” on one of the two reader I/O connectors is active, or
    • Front tampering alarm sensor is activated, or
    • Back tampering alarm switch is activated
  • Input CasingOpen. This input is active when:
    • Front tampering alarm sensor is activated, or
    • Back tampering alarm switch is activated.
The front and back tampering alarms can be disabled by putting a jumper on the respective 2- pin Tampering Alarm Pin Header.
  • Tampering alarm pin header – front (TF)
  • Tampering alarm pin header – back (TB)