Setting MR51e to use Public DHCP addressing mode - Synergis™ Softwire 11.1

Synergis™ Softwire Integration Guide 11.1

Applies to
Synergis™ Softwire 11.1
Last updated
2021-04-06
Content type
Guides > Integration guides
Language
English (United States)
Product
Synergis™ Softwire
Version
11.1

If your network supports DHCP, it is recommended to set your MR51e panels to use Public DCHP addressing model.

Procedure

  1. On the MR51e panel, set S1 (Configuration DIP switches) to '0001'.
    Set DIP Switch 4, 3, and 2 to OFF, and DIP Switch 1 to ON.
  2. Press S2 (Reset Switch).