For Aperio integration, the Synergis™ unit connects to the Aperio-enabled locks through a communication hub that is connected either over IP or to one of its RS-485 channels. Each Aperio-enabled lock is viewed as an interface module.
Synergis™ Softwire 11.1 supports the following Aperio-enabled devices:
|A100||Keyless entry control||Supported by design|
|AH30 v5||Wireless communication hub. Each hub controls up to 8 Aperio devices.||1.0.0||Supported by design|
|AH30 v3||Wireless communication hub. Each hub controls up to 8 Aperio devices.||6.9.34196||Certified|
|AH30 v2||Wireless communication hub. Each hub controls up to 8 Aperio devices.||6.4.30660||Supported by design|
|AH40 v5||Wireless communication hub that connects to the Synergis™ unit over IP. Each hub controls up to 16 Aperio devices, for a total of 64 devices per Synergis™ unit. Powered by PoE or power supply.||1.0.0||Supported by design|
|AH40 v3||Wireless communication hub that connects to the Synergis™ unit over IP. Each hub controls up to 16 Aperio devices, for a total of 64 devices per Synergis™ unit. Powered by PoE or power supply.||1.10.3476||Certified|
|AS100||Door position sensor||Supported by design|
|C100||Single- or double-knob cylinder lock (European model)1||1.0.33964||Supported by design|
|E100||Standard escutcheon RFID reader (European model)||1.0.33964||Certified|
|G100||Digital glass door lock||1.0.34116||Supported by design|
|H100||Access control handle (European model)||Supported by design|
|IN100 v3||v3 lock||1.0.33964||Certified|
|IN100 v2||Cylinder or mortise lock||1.0.31459||Supported by design|
|K100||K100 Cabinet Lock||1.0.33964||Supported by design|
|KS100||KS100 Server Cabinet Lock||1.0.33964||Supported by design|
|L100||Electronic lock RFID-Reader (European model)||1.0.33964||Supported by design|
|M100||Wire-free retrofit mortise||Supported by design|
|P100||Padlock||Supported by design|
|PR100 HF/LF||PR100 high and low frequency locks||2.6.6||Supported by design|
|R100||Surface-mounted wireless reader||2.8.1||Supported by design|
1 The double-knob C100 is two locks, and can be configured as a door with two strikes.
2 The minimum supported version for AH30 v3 to work with IN100 v3 locks is 6.5.31904.