SimonsVoss SmartIntego lock integration requires a Mercury EP or LP (or Honeywell) controller. If the SmartIntego locks are disconnected from their controller, the locks cannot grant access or store offline events.
- Feature is offered by the interface module and is supported by Synergis™ Softwire.
- Feature is offered by the interface module but is not supported by Synergis™ Softwire.
- Not applicable
- Feature is not offered by the interface module.
|Category of interface module||Electronic lock|
|Communication protocol1||IP, radio|
|Online operation (connected to the Synergis™ unit)||Not applicable|
|Offline operation (no connection to the Synergis™ unit)||Not applicable|
|Reader communication protocols||Not applicable|
|Maximum credential length (in bits)||644|
|Recommended maximum number of interface modules per Synergis™ unit||Not applicable5|
1 The Gateway node communicates with the Synergis™ unit over IP. The Gateway node communicates with the wireless locks over radio.
2 All SmartIntego wireless locks communicates over a 868 MHz channel using AES-128 bit encryption.
3 Requires the Gateway node (communication module).
4 The credential limit of the default configuration. Up to eight different credential lengths are supported.
5 In the SimonsVoss lock integration, it is the Mercury controller that is viewed as the , not the SimonsVoss lock. For the recommended number of Mercury EP or LP controllers per Synergis™ unit, see Supported Mercury controller features in Synergis™ Softwire 11.1.