Hardening Axis controllers - Synergis™ Softwire 11.2

Synergis™ Softwire Integration Guide 11.2

Applies to
Synergis™ Softwire 11.2
Last updated
2021-12-17
Content type
Language
English
Version
11.2
It is recommended to enable IP address filtering on the Axis controller to allow the IP addresses of the Synergis™ unit and of the admin workstation to connect to the controller.

Before you begin

Procedure

  1. Log on to the Axis controller web portal.
    For more information, see the Axis documentation.
  2. Click Setup > Additional Controller Configuration > System Options > Security > IP Address Filter.
  3. Select the Enable IP address filtering option, and select Allow from the list.
  4. Click Apply.
  5. In the Filtered IP Addresses list, add the IP address of the Synergis™ unit and the IP address of the administrative workstation that must log on to the Axis controller web portal.
    Example:
  6. Under System options, click Network > TCP/IP > Advanced, and disable both FTP server and RTSP server options.
    They are not used by Synergis™ Softwire.
  7. Click Save.