Supported Axis controllers in Synergis™ Softwire 11.2 - Synergis™ Softwire 11.2

Synergis™ Softwire Integration Guide 11.2

Applies to
Synergis™ Softwire 11.2
Last updated
2021-12-17
Content type
Language
English
Version
11.2

For an Axis controller integration, each A1001 or A1601 controller is viewed as an interface module.

Synergis™ Softwire 11.2 supports the Axis A1001 and A1601 controllers.
Model Description Supported firmware
A1001 Two-door controller supporting IP communication, featuring two readers, one dry relay and two auxiliary outputs. Suitable for two Card-in/REX-out doors or one Card-in/Card-out door. Powered by PoE. Recommended: 1.65.41
A1601 Two-door controller supporting IP communication, featuring two readers, two dry relays, and six auxiliary I/Os.
NOTE: Starting in Synergis™ Softwire 11.2.2, you can configure the auxiliary I/Os as either inputs or outputs in the Synergis™ Appliance Portal. In versions earlier than 11.2.2, the auxiliary I/Os are not configurable; four of them are inputs and the two others are outputs.
Suitable for two Card-in/REX-out doors or one Card-in/Card-out door. Powered by PoE+.
Recommended: 1.84.21

1 You can apply the recommended firmware from the Interface upgrade page of the Synergis™ Appliance Portal.