Supported SALTO SALLIS hardware in Synergis™ Softwire 11.2 - Synergis™ Softwire 11.2

Synergis™ Softwire Integration Guide 11.2

Applies to
Synergis™ Softwire 11.2
Last updated
2023-04-03
Content type
Guides > Integration guides
Language
English
Product
Synergis™ Softwire
Version
11.2
Category
Integration guides

In a SALTO SALLIS integration, the Synergis™ unit connects to the SALLIS locks through a wireless router that is connected to its IP channel or one of its RS-485 channels. Each SALLIS lock is viewed as an interface module.

Synergis™ Softwire 11.2 supports the following SALTO SALLIS devices:
Model Description Supported firmware
SALLISROUTER RS485 SALLIS RS-485 router connecting the Synergis™ unit to the wireless (RF) communication nodes. 01.21
SALLISROUTER POE SALLIS PoE router connecting the Synergis™ unit to the wireless (RF) communication nodes. 01.23
SALLISNODE SALLIS RF communication node between the SALLIS router and the SALLIS lock system. It works with both the RS-485 and the PoE routers. 02.00
Salto SALLIS lock SALLIS lock system used to control the physical access to a premise. 02.01
IMPORTANT: After changing the battery on the lock, always re-initialize it and restart the router.