Transferring files to OSDP readers in Synergis™ Softwire 11.2 - Synergis™ Softwire 11.2

Synergis™ Softwire Integration Guide 11.2

Applies to
Synergis™ Softwire 11.2
Last updated
Content type
Guides > Integration guides
Synergis™ Softwire

You can upgrade the firmware or configuration of OSDP readers by transferring files to the readers in the Synergis™ Appliance Portal.

What you should know

  • The following procedure only applies to OSDP readers that connect directly to the Synergis™ Cloud Link unit.
  • Use the firmware and configuration files provided by your manufacturer.


  1. Log on to the Synergis™ unit.
  2. Click Configuration > Advanced OSDP.
  3. In the File Transfer section, select the check box in the Transfer column of the readers to which you want to transfer the file.
  4. Click Select file.
  5. In the file browser, select the firmware or configuration file, and click Open.
  6. Click Transfer file.


The firmware or configuration is applied after the selected readers restart.