For DDS integration, each TPL door controller is viewed as an interface module.
Synergis™
Softwire
11.3 supports the following DDS hardware
devices:
NOTE: This
integration is only supported with legacy Synergis™ Cloud
Link
appliances, not with next-generation Synergis™ Cloud
Link
appliances.
| Model | Description | Firmware |
|---|---|---|
| AS34 or TPL | Door controller supporting RS-485 communication, featuring four Wiegand
readers, suitable for two card in/card out doors. NOTE: Make sure the ROM chip
installed on the U5 socket of the TPL board is labeled
5xxxa.
|
Synergis™ Softwire requires a custom version of the firmware. The custom firmware is automatically pushed to the TPL module during enrollment. |
| AS34-P4 or TPL-P4 | Door controller supporting RS-485 communication, featuring four Wiegand
readers, suitable for four card in/REX out doors. NOTE: Make sure the ROM chip
installed on the U5 socket of the TPL board is labeled
6xxxa.
|
|
| EXT-TCPT | TCP/IP extension board for the TPL door controller. | Not applicable |
| EXT-8E4S | TCP/IP extension board adding 8 supervised inputs and 4 outputs to the TPL
door controller with the ROM chip 6xxx1. This combination is equivalent to adding TCP/IP interface to the TPL-P4 controller. |
Not applicable |
1The exact chip number depends on the storage capacity of the ROM.