Interface modules come in all shapes and sizes and offer a wide range of features. Synergis™ Softwire supports most of the common features found on the market.
Synergis™
Softwire
11.3 supports the following SALTO SALLIS features.
The following is the legend for some common values
found in the Supported column:
- Yes
- Synergis™ Softwire supports the feature and the interface module offers it.
- No
- Synergis™ Softwire does not support the feature, but the interface module offers it.
- Not applicable
- The interface module does not offer the feature.
| Features | Supported |
|---|---|
| General characteristics | |
| Category of interface module | Electronic lock |
| Communication protocol | (IP or RS-485)1 |
| Encrypted communication | IP and RS-485 |
| Online operation (connected to the Synergis™ unit) | |
| Standalone mode | Not applicable |
| Supervised mode | No |
| Dependent mode | Yes |
| Offline operation (no connection to the Synergis™ unit) | |
| Standalone mode | No |
| Degraded mode | No |
| Wireless operation | |
| Contact the Synergis™ unit on event | On read |
| Scheduled radio contact | Every 8 sec. |
| Battery checks | Every 10 min. |
| Power fail lock settings (Fail Safe/Fail Secure) | Not applicable |
| Scalability | |
| Maximum number of offline events | Not applicable |
| Maximum number of credentials (for autonomous decision making) | Not applicable |
| Maximum credential length (in bits) | 562 |
| Maximum number of interface modules per Synergis™ unit RS-485 channel | 163 |
| Recommended maximum number of interface modules per Synergis™ unit | 644 |
1 Protocol between the Synergis™ unit and the SALLIS router.
2 The maximum credential length must be set from the SALLIS application, under Installation Data, IDCode Size.
3 One RS-485 router per channel, and up to 16 locks per router.
4 Four RS-485 routers with 16 locks each. Up to 8 PoE routers for a maximum of 64 locks. One PoE router supports up to 64 locks.