Supported SALTO SALLIS hardware in Synergis™ Softwire 11.3 - Synergis™ Softwire 11.3

Synergis™ Softwire Integration Guide 11.3

Applies to
Synergis™ Softwire 11.3
Last updated
2023-04-03
Content type
Guides > Integration guides
Language
English
Product
Synergis™ Softwire
Version
11.3

In a SALTO SALLIS integration, the Synergis™ unit connects to the SALLIS locks through a wireless router that is connected to its IP channel or one of its RS-485 channels. Each SALLIS lock is viewed as an interface module.

The following SALTO SALLIS devices are supported in Synergis™ Softwire 11.3 and in Synergis™ Cloud Link 2.0.4 and later.
Model Description Supported firmware
SALLISROUTER RS485 SALLIS RS-485 router connecting the Synergis™ unit to the wireless (RF) communication nodes.
IMPORTANT: Not to be confused with SALLISROUT485-01, which we do not support.
01.21
SALLISROUTER POE SALLIS PoE router connecting the Synergis™ unit to the wireless (RF) communication nodes. 01.23
SALLISNODE SALLIS RF communication node between the SALLIS router and the SALLIS lock system. It works with both the RS-485 and the PoE routers. 02.00
Salto SALLIS lock SALLIS lock system used to control the physical access to a premise. 02.01
IMPORTANT: After changing the battery on the lock, always re-initialize it and restart the router.