Interface modules come in all shapes and sizes and offer a wide range of features. Synergis™ Softwire supports most of the common features found on the market.
Synergis Softwire
11.4.3 supports the following SALTO SALLIS features.
The following is the legend for some common values
found in the Supported column:
- Yes
- Synergis Softwire supports the feature and the interface module offers it.
- No
- Synergis Softwire does not support the feature, but the interface module offers it.
- Not applicable
- The interface module does not offer the feature.
Features | Supported |
---|---|
General characteristics | |
Category of interface module | Electronic lock |
Communication protocol | (IP or RS-485)1 |
Encrypted communication | IP and RS-485 |
Online operation (connected to the Synergis unit) | |
Standalone mode | Not applicable |
Supervised mode | No |
Dependent mode | Yes |
Offline operation (no connection to the Synergis unit) | |
Standalone mode | No |
Degraded mode | No |
Wireless operation | |
Contact the Synergis™ unit on event | On read |
Scheduled radio contact | Every 8 sec. |
Battery checks | Every 10 min. |
Power fail lock settings (Fail Safe/Fail Secure) | Not applicable |
Scalability | |
Maximum number of offline events | Not applicable |
Maximum number of credentials (for autonomous decision making) | Not applicable |
Maximum credential length (in bits) | 562 |
Maximum number of interface modules per Synergis unit RS-485 channel | 163 |
Recommended maximum number of interface modules per Synergis unit | 644 |
1 Protocol between the Synergis unit and the SALLIS router.
2 The maximum credential length must be set from the SALLIS application, under Installation Data, IDCode Size.
3 One RS-485 router per channel, and up to 16 locks per router.
4 Four RS-485 routers with 16 locks each. Up to 8 PoE routers for a maximum of 64 locks. One PoE router supports up to 64 locks.