Supported SimonsVoss locks in Synergis Softwire 11.5.3 - Synergis Softwire 11.5.3

Synergis™ Softwire Integration Guide 11.5.3
Product
Synergis Softwire
Content type
Guides > Integration guides
Version
11.5
Release
11.5.3
ft:locale
en-US
Last updated
2025-01-23

SimonsVoss SmartIntego lock integration requires a Mercury EP, LP, MP, or Honeywell controller. For this integration, the Mercury controllers are viewed as interface modules, and the SmartIntego locks are viewed as non-intelligent devices. All SmartIntego locks are wireless.

The Mercury or Honeywell controllers communicate directly with the Synergis™ unit.

Synergis™ Softwire 11.5.3 supports all SmartIntego models that work with Mercury IP controllers:
Model Description Minimum compatible versions
IP controllers A Mercury or Honeywell controller must act as an interface module between the Synergis unit and the SmartIntego locks.
The following controllers are supported:
  • Mercury EP1501, LP1501, and MP1501 controllers with expansion board, supporting up to 16 SmartIntego locks
  • Mercury EP1502, LP1502, MP1502, EP2500, LP2500, MP2500, EP4502, LP4502, and MP4502 controllers supporting up to 64 SmartIntego locks
  • Honeywell PW6K1IC and PRO32IC controllers supporting up to 64 SmartIntego locks

See also Supported Mercury firmware versions in Synergis Softwire 11.5.3.
  • Mercury EP1501, EP1502, EP2500, and Honeywell PW6K1IC:
    • Security Center 5.8
    • Synergis Softwire 10.4
  • Mercury LP1501, LP1502, and LP2500:
    • Security Center 5.8
    • Synergis Softwire 10.10
  • Mercury EP4502, LP4502, and Honeywell PRO32IC:
    • Security Center 5.9.0.0
    • Synergis Softwire 10.11
  • Mercury MP1502 and MP4502:
    • Security Center 5.12.1.0
    • Synergis Softwire 11.5.3
  • Mercury MP1501 and MP2500:
    • Security Center 5.12.1.0
    • Synergis Softwire 11.5.3
Gateway node Handles the communication between the Mercury IP controller and SmartIntego locks. Up to 16 locking devices per node through an 868 MHz wireless connection, with a range up to 30 meters.
  • Security Center 5.8
  • Synergis Softwire 10.4
Programming dongle Required to pair the locks to the Gateway node.
  • Security Center 5.8
  • Synergis Softwire 10.4
Smart Handle Door handle and reader combo. Includes a manual REX out which cannot be monitored. May come with or without inputs.
  • Security Center 5.8
  • Synergis Softwire 10.4
Digital Locking Cylinder Different wireless models; some of them have two readers, but only one reader is detected by the Mercury IP controller. May come with or without inputs.
  • Security Center 5.8
  • Synergis Softwire 10.4
Padlock Padlock with no keyhole, only a card reader.
  • Security Center 5.8
  • Synergis Softwire 10.4

Limitations

  • Manual unlock and relock commands can take more time than expected to be run because the commands rely on wireless communication that can take a few seconds to respond.
  • Only MIFARE DESFire and MIFARE Plus card formats are supported.