Supported secure I/O modules in Synergis Softwire 11.5.3 - Synergis Softwire 11.5.3

Synergis™ Softwire Integration Guide 11.5.3
Product
Synergis Softwire
Content type
Guides > Integration guides
Version
11.5
Release
11.5.3
ft:locale
en-US
Last updated
2025-01-23

Secure I/O modules connect to the Synergis™ Cloud Link unit through an OSDP secure channel over RS-485. For secure I/O module integration, each I/O module is viewed as an interface module.

The following secure I/O modules are only available in Europe, and are supported by Synergis™ Softwire 11.5.3:
Model Description Certified firmware
STid secure I/O module I/O module with the following:
  • 8 inputs (can also be used as AC failure, Battery failure, or Tamper switch)
  • 1 tamper
  • 1 AC or Battery fail
  • 8 outputs (inactive by default)
 1.0.42
phg secure I/O module I/O module with the following:
  • 4 inputs (can also be used as AC failure, Battery failure, or Tamper switch)
  • 1 tamper (connected to the casing)
  • 4 outputs (inactive by default)
 1.7.0