Adding landings to Thyssenkruppelevator groups - Thyssenkrupp 3.2.0

Thyssenkrupp Plugin Guide 3.2.0

Applies to
Thyssenkrupp 3.2.0
Last updated
2021-09-17
Content type
Guides > Plugin and extension guides
Language
English
Product
Thyssenkrupp
Version
3.2

To configure elevator groups, you must add landings to them.

Before you begin

Create elevator groups.

What you should know

You can configure landings manually, or slide the Auto-discovery toggle to ON and have the entities import automatically during a heartbeat exchange with the Thyssenkrupp server.

Procedure

  1. From the home page in Config Tool, open the Plugins task.
  2. From the entity browser, select the Thyssenkrupp plugin, and then click the Configuration tab.
  3. Right-click an Elevator group and select Landing.
  4. (Optional) Add a Name and a Description for the landing.
    NOTE: The default name follows the Thyssenkrupp naming convention, which is elevator group number, entity number, then front or rear. For example, Landing 3.1.F is the front landing on the first floor in elevator group 3.

    Config Tool automatically uses the next available Thyssenkrupp ID for each landing that you add. If you do not give the landings custom names, then Config Tool automatically increases the landing numbers by increments of 1. For example, Landing 3.1.F is followed by Landing 3.2.F.

  5. Click Apply.