Before you can temporarily override secure states on a floor or landing for building
maintenance or emergencies, you must configure the override in Security Center.
What you should know
Using manual overrides enables you to temporarily suspend the secure state of a
source or destination for a set amount of time, or unsecure a whole floor or building in
the case of an emergency.
Procedure
-
From the entity browser, select the floor or landing you want to
configure.
-
In the Overrides section, click Add ().
NOTE: You can also right-click the floor or landing, or multiple floors or
landings, and then select the
Create security
override menu item.
The Create security override window
opens.
-
Configure the settings in the Create security override
window:
- Name
- Enter a name for this override.
- Source
- Select the DED from which the override is applied. You can also set
the source to Any, which creates an override
for all DEDs connected to the selected landings or floors..
- Start
- Enter the date and time that the override begins.
- Duration
- Enter how long the override lasts.
- Access
- Select whether the scheduled access is secured or unsecured.
- Reason
- Enter a reason for the override.
NOTE: You cannot set up recurring overrides.
-
Click OK.
-
Click Apply.