Creating a custom card format for a Traka cabinet keypad ID - If users must enter a keypad ID (code) to open a Traka cabinet, create a custom card format. - Traka Asset Management 3.4.4 - Plugin and extension guides

Traka Asset Management Plugin Guide 3.4.4
Product
TRAKA Asset Management
Content type
Guides > Plugin and extension guides
Version
3.4
Release
3.4.4
ft:locale
en-US
Last updated
2026-03-04

If users must enter a keypad ID (code) to open a Traka cabinet, create a custom card format.

What you should know

  • Security Center uses the card format to interpret the incoming information correctly. The custom card format you create will indicate which bits on a credential contain the keypad ID.
    Tip: If your Traka cabinets do not use a keypad ID (Keypad code), do not create a custom card format. Instead, from the plugin role Properties page, in the Traka keypad section, set the custom card format to None.

Procedure

  1. Open the Access control task, and click the General settings view.
  2. Under Custom card formats, click Add an item ().
  3. In the Custom card format editor, do the following:
    1. In the Name field, enter Traka keypad ID.
    2. Under Card format type, select Wiegand.
    3. Under Format length, select 32 bits.
    4. Define the Wiegand data fields as follows:
    • Name: Keypad
    • Mask: 0-31
    • Representation: Decimal
    • Fixed, value: OFF
  4. Click OK.
  5. Click Apply.

After you finish

Browse