Creating UTC Advisor Master and Advanced users from Security Center cardholder groups - UTC Advisor Master and Advanced 3.1

To push cardholder groups from Security Center to the UTC Advisor Master and Advanced, you must add the group in the extension and then push them to the panel.

1. From the Config Tool home page, open the Intrusion detection task.
2. Expand the Intrusion Manager role from the entity browser, and select the intrusion detection unit you want to configure.
3. Click the Users tab.
4. In the Group mappings section, click Insert an item ().
5. From the dialog box that opens, select a cardholder group, and then click OK.
   The cardholder groups is listed in the group mappings table.
6. (Optional) Configure the following panel-specific settings:

   User groups

   Indicates which group or groups on the panel the user is part of.

   Language

   Defines the language of the menus presented to the cardholder at the module.

   Use extended shunt time

   Grants the cardholder an extended access period after presenting a valid card or entering a valid PIN.

   Mode

   Grants the cardholder control over intrusion areas, groups, or both.

   Privileged

   Grants the user the privilege to override antipassback settings on the panel, and access restricted intrusion detection areas.

   Trace

   Logs access events linked to the cardholder.

   User type

   Defines the panel user as being one of the following types:

   • Normal: Functions normally
   • Two-cards: Two card swipes or user codes are required to perform alarm or access-control functions.
   • Guard: The card or code only works with that of a Visitor.
   • Visitor: The card or code only works with that of a Guard.
   • High security user: Makes the user a high-security user. High-security users are required for granting normal cardholders access to security areas on panels.

   Door groups

   Defines which door groups the panel user can access.

   The settings to configure may vary based on the panel to which you are pushing cardholder groups.
7. Select the Synchronize with user mappings option for the cardholders in the group to be automatically synchronized in the user mappings table.
8. Click Apply.