Adding outputs manually to UTC Advisor Master and Advanced units - UTC Advisor Master and Advanced 3.2.0

UTC Advisor Master and Advanced Intrusion Panel Extension Guide 3.2.0

Applies to
UTC Advisor Master and Advanced 3.2.0
Last updated
2024-03-15
Content type
Guides > Plugin and extension guides
Language
English
Product
UTC Advisor Master and Advanced
Version
3.2

When a panel is offline or not connected, the import function does not work. If you want to pre-commission the outputs, you add them manually.

What you should know

If the panel is online and connected, it is recommended to use the import function. However, when you need to pre-commission a panel you can add its components manually.

Procedure

  1. From the Config Tool homepage, open the Intrusion detection task.
  2. Expand the Intrusion Manager role from the entity browser, and then select the intrusion detection unit you want to configure.
  3. On the Outputs tab, click Add ().
  4. Enter the following information:
    Name
    The descriptive name of the output. The name can be different than the value configured on the panel. To make future maintenance of the system easier, it is recommended that the name is unique.
    ID number
    The unique number that identifies the output on the panel. This value must match the value configured on the panel.
  5. Click Apply.

After you finish

Map events to actions.