Configuring inputs and outputs for Vanderbilt SPC integration - SPC intrusion panel 3.1

Vanderbilt SPC Intrusion Panel Extension Guide 3.1
Applies to
SPC intrusion panel 3.1
Last updated
2023-07-20
Content type
Guides > Plugin and extension guides
Language
English
Product
SPC intrusion panel
Version
3.1

In the intrusion detection unit Peripherals tab, you can assign logical IDs and descriptions to the inputs (zones) and outputs (relays) controlled by the unit.

What you should know

Input types are configured on the panel itself; the input type cannot be configured in Security Center.

Procedure

  1. From the Config Tool home page, open the Intrusion detection task.
  2. Select the intrusion detection unit to configure, and click the Peripherals tab.
  3. Select an input, and at the bottom of the Peripherals tab, click .
  4. In the Name field, the name of the input connected to the panel is displayed.
  5. Enter a Logical ID for the input.
    Setting a Logical ID helps you to easily identify the input in Security Center.
  6. Enter a Description for the input.
  7. Click OK, and then click Apply.
  8. Select an output, and at the bottom of the Peripherals tab, click .
  9. In the Name field, the name of the output connected to the panel is displayed.
  10. Enter a Logical ID for the output.
    Setting a Logical ID helps you to easily identify the output in Security Center.
  11. Enter a Description for the output.
  12. Click OK, and then click Apply.