The extension automatically maps Vanderbilt SPC events with events and custom events in Security Center.
| Vanderbilt SPC event | Security Center event |
|---|---|
| Burglary Alarm [Alarm Zone] | Intrusion detection area alarm activated |
| Burglary Alarm [Entry/Exit Zone] | |
| Burglary Alarm [Exit Term Zone] | |
| Burglary Alarm [Fire Exit Zone] | |
| Burglary Alarm [Seismic Zone] | |
| Burglary Alarm [Lock element Zone] | |
| Burglary Alarm [Glass Break Zone] | |
| Unset1 | Intrusion detection area disarmed |
| 1When an area is unset, in most
cases, no alarm is triggered if an input (zone) is activated. In somes
cases, a 24-hour input can trigger an alarm even if the area is
unset. For more information about Unset mode, refer to Vanderbilt SPC documentation. |
|
| User Duress2 | Intrusion detection area duress |
| 2The User Duress function
activates a silent signal that is sent to alert security personnel. The User Duress event is triggered by incrementing the last digit of a user's PIN. This option must be configured by an SPC administrator. For more information about User Duress, refer to Vanderbilt SPC documentation. |
|
| Entry Timer Started3 | Intrusion detection area entry delay activated |
| 3When the exit time period has
expired, the system is set and opening an entry/exit input (zone) starts
the entry timer. If the system is not unset before the entry timer
expires, the alarm is activated. For more information about Entry Timer Started, refer to Vanderbilt SPC documentation. |
|
| Fullset4 | Intrusion detection area master armed |
| 4When an area is set, an alarm is
triggered when an input (zone) is activated. In Fullset mode, all inputs included in the area are able to trigger an alarm, if activated. In certain cases (for example, when a zone is already activated or in trouble), it is not possible to set an area. The area state displayed in this case is Disarmed, not ready to arm. For more information about Fullset mode, refer to Vanderbilt SPC documentation. |
|
| Partset A or Partset B5 | Intrusion detection area perimeter armed |
| 5When an area is set, an alarm is
triggered when an input (zone) is activated. In PartSet mode, only a few inputs included in the area are able to trigger an alarm, if activated. In certain cases (for example, when a zone is already activated or in trouble), it is not possible to set an area. The area state displayed in this case is Disarmed, not ready to arm. For more information about Partset mode, refer to Vanderbilt SPC documentation. |
|
| Zone inhibit [Alarm Zone] | Intrusion detection unit input bypass activated |
| Zone inhibit [Entry/Exit Zone] | |
| Zone inhibit [Exit Term Zone | |
| Zone inhibit [Fire Zone] | |
| Zone inhibit [Fire Exit Zone] | |
| Zone inhibit [Line Zone] | |
| Zone inhibit [Panic Zone] | |
| Zone inhibit [Holdup Zone] | |
| Zone inhibit [Tamper Zone] | |
| Zone inhibit [Tech Zone] | |
| Zone inhibit [Medical Zone | |
| Zone inhibit [Keyarm Zone | |
| Zone inhibit [Unused Zone | |
| Zone inhibit [Shunt Zone] | |
| Zone inhibit [X-Shunt Zone] | |
| Zone inhibit [Detector Fault Zone] | |
| Zone inhibit [Lock Supervision Zone] | |
| Zone inhibit [Lock Supervision Zone] | |
| Zone inhibit [Seismic Zone] | |
| Zone inhibit [All Okay Zone] | |
| Zone inhibit [Holdup Fault Zone] | |
| Zone inhibit [Warning Fault Zone] | |
| Zone inhibit [Setting authorisation Zone] | |
| Zone inhibit [Lock element Zone] | |
| Zone inhibit [Glass Break Zone] | |
| Zone deinhibit [Alarm Zone] | Intrusion detection unit input bypass deactivated |
| Zone deinhibit [Entry/Exit Zone] | |
| Zone deinhibit [Exit Term Zone | |
| Zone deinhibit [Fire Zone] | |
| Zone deinhibit [Fire Exit Zone] | |
| Zone deinhibit [Line Zone] | |
| Zone deinhibit [Panic Zone] | |
| Zone deinhibit [Holdup Zone] | |
| Zone deinhibit [Tamper Zone] | |
| Zone deinhibit [Tech Zone] | |
| Zone deinhibit [Medical Zone | |
| Zone deinhibit [Keyarm Zone | |
| Zone deinhibit [Unused Zone | |
| Zone deinhibit [Shunt Zone] | |
| Zone deinhibit [X-Shunt Zone] | |
| Zone deinhibit [Detector Fault Zone] | |
| Zone deinhibit [Lock Supervision Zone] | |
| Zone deinhibit [Lock Supervision Zone] | |
| Zone deinhibit [Seismic Zone] | |
| Zone deinhibit [All Okay Zone] | |
| Zone deinhibit [Holdup Fault Zone] | |
| Zone deinhibit [Warning Fault Zone] | |
| Zone deinhibit [Setting authorisation Zone] | |
| Zone deinhibit [Lock element Zone] | |
| Zone deinhibit [Glass Break Zone] | |
| Zone alarm [Tamper Zone] | Intrusion detection unit input tamper |
| Zone tamper [Alarm Zone] | |
| Zone tamper [Entry/Exit Zone] | |
| Zone tamper [Exit Term Zone] | |
| Zone tamper [Fire Zone] | |
| Zone tamper [Fire Exit Zone] | |
| Zone tamper [Line Zone] | |
| Zone tamper [Panic Zone] | |
| Zone tamper [Holdup Zone] | |
| Zone tamper [Tamper Zone] | |
| Zone tamper [Tech Zone] | |
| Zone tamper [Medical Zone] | |
| Zone tamper [Keyarm Zone] | |
| Zone tamper [Unused Zone] | |
| Zone tamper [Shunt Zone] | |
| Zone tamper [X-Shunt Zone] | |
| Zone tamper [Detector Fault Zone] | |
| Zone tamper [Lock Supervision Zone] | |
| Zone tamper [Seismic Zone] | |
| Zone tamper [All Okay Zone] | |
| Zone tamper [Holdup Fault Zone] | |
| Zone tamper [Warning Fault Zone] | |
| Zone tamper [Setting authorisation Zone] | |
| Zone tamper [Lock element Zone] | |
| Zone tamper [Glass Break Zone] | |
| Zone alarm [Line Zone] | Intrusion detection unit trouble |
| Zone alarm [Holdup Fault Zone] | |
| Zone alarm [Warning Fault Zone] | |
| Trouble [Alarm Zone] | |
| Trouble [Entry/Exit Zone] | |
| Trouble [Exit Term Zone] | |
| Trouble [Fire Zone] | |
| Trouble [Fire Exit Zone] | |
| Trouble [Line Zone] | |
| Trouble [Panic Zone] | |
| Trouble [Holdup Zone] | |
| Trouble [Tamper Zone] | |
| Trouble [Tech Zone] | |
| Trouble [Medical Zone] | |
| Trouble [Keyarm Zone] | |
| Trouble [Unused Zone] | |
| Trouble [Shunt Zone] | |
| Trouble [X-Shunt Zone] | |
| Trouble [Detector Fault Zone] | |
| Trouble [Lock Supervision Zone] | |
| Trouble [Seismic Zone] | |
| Trouble [All Okay Zone] | |
| Trouble [Holdup Fault Zone] | |
| Trouble [Warning Fault Zone] | |
| Trouble [Setting authorisation Zone] | |
| Trouble [Lock element Zone] | |
| Trouble [Glass Break Zone] | |
| Zone Low battery | |
| Burglary Alarm [Alarm Zone] | Input alarm activated |
| Burglary Alarm [Entry/Exit Zone] | |
| Burglary Alarm [Exit Term Zone] | |
| Burglary Alarm [Fire Exit Zone] | |
| Burglary Alarm [Seismic Zone] | |
| Burglary Alarm [Lock element Zone] | |
| Burglary Alarm [Glass Break Zone] | |
| Burglary Restoral [Alarm Zone] | Input alarm restored |
| Burglary Restoral [Entry/Exit Zone] | |
| Burglary Restoral [Exit Term Zone] | |
| Burglary Restoral [Fire Exit Zone] | |
| Burglary Restoral [Seismic Zone] | |
| Burglary Restoral [Lock element Zone] | |
| Burglary Restoral [Glass Break Zone] | |
| Zone input open or closed | Input state changed: Input active |
| Zone input open or closed | Input state changed: Input normal |
| Zone input shorted | Input state changed: Input trouble |
| Zone input disconnected | |
| Zone input PIR masked | |
| Zone input fault | |
| Zone input unstable | |
| Zone input out of bounds | |