Configuring EIZO video wall settings - Video Wall 3.1

You can configure certain settings of the EIZO video wall directly from Config Tool. These settings are also configurable from the video wall's web page.

1. From the Config Tool home page, open the Plugins task.
2. In the Plugins task, from the entity browser, expand the plugin role and the EIZO video wall unit, and then select the EIZO video wall you want to configure.
   
3. Configure the following fields:

   Brightness

   Adjust the brightness percentage of the monitor.

   Aspect ratio mode

   Select an aspect ratio for the video.

   Camera name display

   Display or hide the name of the camera on the video.

   Key lock

   When set to ON, the buttons on the front of the monitor are disabled.

   USB lock

   When set to ON, the use USB devices are disabled.

   NOTE: When this setting is modified, the monitor must be restarted.

   IR controller lock

   When set to ON, the operations from the remote control are disabled.

   Fullscreen

   Display or hide the menu on the monitor.

   Sleep prevention mode

   Select a schedule. When the schedule is active the video wall is in Live Image Screen mode. When the schedule is inactive, the Quick Shutdown mode is enabled.

   Local display control

   Set to ON if you want to control the video wall using Security Center, and control the video wall directly, for example, using the remote or the monitor's web page. Set to OFF if you want to control the video wall using only Security Center.

   NOTE: When set to OFF, changes that are not made using Security Center will be reverted unexpectedly.

4. To configure additional video wall settings, click Open settings web page.