Selecting the credential type required to access deister proxSafe lockers - deister proxSafe 3.2.1

deister proxSafe Plugin Guide 3.2.1

Applies to
deister proxSafe 3.2.1
Last updated
2023-10-26
Content type
Guides > Plugin and extension guides
Language
English
Product
deister proxSafe
Version
3.2

To provide access to deister proxSafe lockers, you must select which type of cardholder credential is required.

What you should know

  • Only the first active card and first active PIN are pushed to the cabinet.
  • PIN codes must be unique throughout the system.
  • If you select multiple authentication methods, the more restrictive setting that meets the criteria for the method is used. For example: If you select Card and PIN, all cardholders with cards and PINs are required to present a card and enter a PIN. However, if you also select Card, cardholders with cards and PINS must use both, while cardholders with cards but no PINs only need to present their cards.

Procedure

  1. From the Config Tool home page, open the Plugins task.
  2. In the Plugins task, select the plugin role from the entity browser, and click the Properties tab.
  3. Select the authentication method used by the deister proxSafe locker.
    Card and PIN
    Users must swipe their access control card and enter their PIN to open a locker.
    Card
    Users must swipe their access control card to open a locker.
    PIN
    Users must enter their PIN to open a locker.
    Properties page of the deister proxSafe plugin for Security Center with the Authentication section highlighted.
  4. Click Apply.