Creating iLOQ 5 Series S50 mobile credentials - iLOQ 5 Series Digital Locking System 1.0.0

You can create an iLOQ 5 Series S50 credential, configure its properties, and assign it to a cardholder, using the Credential management task.

1. In the Cardholder management task, select the cardholder you want to assign the credential to.
2. Click Modify ().
3. In the cardholder modification dialog box, click the iLOQ credential management option.
   
4. Select the Create mobile credential option.
   
5. If you have multiple iLOQ 5 Series plugins, select the one you want to create the mobile credential for.
6. Enter the following information:

   Name

   Enter a name for the credential entity. Cannot exceed 100 characters.

   Description (optional)

   Enter a description for the credential. Cannot exceed 100 characters.

   Registration mode

   The way to send the key registration message on the mobile device, either by text message or email.

   Phone number

   Mandatory field if the registration mode is set to Text message. Phone number must use international format with country code.

   Email address

   Mandatory field if the registration mode is set to Email.

   Activation date

   Date and time that the credential activates.

   Expiration date

   Date and time the credential expires. Enter a specific date and time.

   NOTE: Setting the expiration date to Never in the wizard is unsupported. See Limitation 3188491 for details.

   Revalidation period

   Enable the revalidation period to keep the credential active while the key is offline. The time entered cannot exceed the value configured on the plugin's Properties tab.

   
7. Click Create.
   The Summary page shows a Mobile credential successfully created message.

   

   NOTE: A Mobile credential creation failed message is displayed if the credential creation was completed, but the plugin was unable to effect the change.
8. Click Finish.