Configurer les propriétés facultatives d'une alarme - Security Center 5.11

Une fois que vous avec créé une alarme et configuré ses propriétés de base, vous pouvez configurer des propriétés supplémentaires.

1. Ouvrez la tâche Alarmes, et cliquez sur la vue Alarmes.
2. Sélectionnez l'alarme à configurer, puis cliquez sur l'onglet Avancé.
3. Configurez les options suivantes :

   Reactivation threshold

   The minimum time Security Center needs to wait after triggering this alarm before it can be triggered again. This option prevents the system from repeatedly triggering the same alarm before it is resolved.

   Alarm procedure (URL)

   Enter the URL or the web page address corresponding to the alarm procedure, which provides alarm handling instructions to the operators. The web page is displayed when the user clicks Show alarm procedure () in the alarm widget in Security Desk.

   Schedule

   Assign schedules to define when this alarm is in operation. You can assign more than one schedule. Outside the periods defined by these schedules, triggering this alarm has no effect.

   Automatic acknowledgment

   Turn this option on to let the system automatically acknowledge this alarm if no one acknowledges it before the specified time (in seconds). This option is recommended for low-priority alarms that serve to alert the security operator, but do not require any action. When this option is turned off, the system follows the Auto ack alarms after option configured at the system level in Server Admin.

   REMARQUE : Automatic acknowledgment does not apply to alarms that have an active condition attached. To acknowledge those alarms, you need to forcibly acknowledge them (which requires the Forcibly acknowledge alarms privilege).

   Create an incident on acknowledgment

   Turn this option on to prompt the Security Desk user to report an incident every time they acknowledge an alarm.

   REMARQUE : Turning this option on turns the automatic acknowledgment option off.

   Automatic video recording

   Turn this option off (default=on) if you do not want to start recording video when the alarm is triggered.

   Protect recorded video

   Alarm sound

   Select the sound to play when a new alarm occurs. This sound overrides the default sound configured in Security Desk > Options > Alarms.

   REMARQUE : For a sound to play when an alarm is triggered, you must click Security Desk > Options > Alarms and enable the Play a sound option.

   Color

   Select a color for the alarm. The color is used for the overlay of the alarm video when it is displayed in a tile in the Alarm monitoring or Monitoring task, as well as when the alarm is triggered on a map.

4. Cliquez sur Appliquer.