Adding Mobotix cameras to Stratocast™ - Stratocast™

You can add Mobotix cameras to client accounts.

1. Log on to Stratocast™ using your integrator credentials.
2. From the Client Accounts page, click in the Number of devices column.
3. Click Enroll a device and select the type of device. Enter the following and then click Next:

   Name

   The name of your device, as identified on the customer’s Devices page. If there are many devices, enter a name that is easy to recognize and find.

   Time zone

   The time zone that the video unit is installed in.

   Manufacturer

   The device manufacturer.

   Tip: Make sure you select the Mobotix manufacturer.

   

   NOTE: If your required manufacturer is not displayed in the drop-down list, contact Stratocast™ support.
4. In the Authenticate video unit window, enter the camera's MAC address, then click Next.
   

   Tip: You can retrieve the MAC address information from the Camera's web page, from the sticker on the camera box, or from the sticker located on the camera.

   Wait a few minutes for Stratocast™ to create an activation code.

   
5. Copy the activation code.
6. In a Web browser, return to the camera's registration page, and click Start Activation.
   Tip: You can reopen the page using the URL https://<IP Address>/Stratocast.

   
   1. Paste in the activation code, and click Activate.
      

      The process is complete when the Activation is Completed message is displayed.

      
7. After the camera has connected to Stratocast™, the Enroll a device window is displayed. Choose a subscription plan and click Next. You can choose any of the 3 plans listed.
   
   1. Configure the resolution, frame rate, and bit rate.
      

      Tip: If you are unsure which settings to use, choose the maximum available for each setting.
   2. Click Enroll.
      The camera starts recording to Stratocast™.