Disabling archiver encryption for units using video streams with decoders - Security Center 5.9.4.0

Security Center Video Unit Configuration Guide 5.9.4.0

series
Security Center 5.9.4.0
revised_modified
2020-11-05

For units that use video streams with decoders, you must disable the Archiver encryption in Config Tool or the video streams are not sent to the decoder.

What you should know

Archiver encryption is enabled by default for new installs, as of 5.8 GA.

Procedure

  1. From the Video task in Config Tool, select the Archiver to configure.
  2. Click the Camera default settings tab, and click Advanced settings.
  3. Set the Encryption option to None.
  4. Click OK > Apply.