Testing Sony PTZ patterns - Security Center 5.9.4.0

Security Center Video Unit Configuration Guide 5.9.4.0

series
Security Center 5.9.4.0
revised_modified
2020-11-05

After you have created a PTZ pattern for a Sony camera using the preset tour feature, you should test the pattern in Security Center.

Procedure

  1. In Config Tool or Security Desk, select the PTZ camera to configure.
  2. Do one of the following:
    • If you are in Config Tool, click Live video ().
    • If you are in Security Desk, select the camera in a tile.
  3. In the PTZ widget, click Toggle to advanced mode ().
  4. From the Patterns drop-down list, select a pattern to play.
    Pattern 0 in Security Center represents preset tour A on the Sony unit, 1=B, 2=C, 3=D, and 4=E.
  5. Click Start pattern ().