Monitoring the status of the Synergis™ Periodic Access Solution macro - Security Center 5.7 - 5.9

Synergis™ Periodic Access Solution Technote

series
Security Center 5.7 - 5.9
revised_modified
2020-06-04

You can use the System status task to start or stop the execution of the Synergis™ Periodic Access Solution macro, and to make sure the macro is running.

Procedure

To monitor the Synergis™ Periodic Access Solution macro:

  1. From the Config Tool home page, open the System status task.
  2. From the Monitor list, select Macros.
    Macros that are currently running are listed in the report pane.

To run the Synergis™ Periodic Access Solution macro:

  1. At the bottom of the System status task, click Start ().
    The Execute macros dialog box opens.
  2. Select the Synergis™ Periodic Access Solution macro, and then click Start.
    The macro is listed in the report pane.

To stop the Synergis™ Periodic Access Solution macro:

  1. From the System status task report pane, select the Synergis™ Periodic Access Solution macro.
  2. At the bottom of the System status task, click Stop ().
    The macro is stopped and removed from the report pane.