Supported Synergis™ appliance features for AutoVu™ Sharp camera integration with Synergis™ Softwire 10.11 - Synergis™ Softwire 10.11

Synergis™ Softwire Integration Guide 10.11

series
Synergis™ Softwire 10.11
revised_modified
2020-06-26

Not all Synergis™ appliance features are supported with the integration of AutoVu™ Sharp cameras.

The Sharp camera integration supports the following Synergis™ Appliance Portal and Synergis™ Softwire features. For a description of these features, see Interface tour of the Synergis™ Appliance Portal.
Synergis™ Appliance Portal and firmware features Supported
Hardware configuration (pre-staging capability)1  
Manual enrollment (Add hardware dialog box) No
Automatic enrollment (Scan button) No
Property configuration No
Configuration cloning (Clone button) No
I/O diagnostics (live monitoring of inputs, relays, and readers) No
Interface module firmware display No
Interface module firmware upgrade (apply recommended firmware) No
Double-badge activation Not applicable
Access control behavior (Synergis™ unit-wide settings)  
Lock relay (After door opens or When door closes) Yes
Interlock setting (Single door unlock or Single door open) Not applicable
Do not generate Door open too long events when door is unrestricted Yes
Reader setting (Card or PIN or Card only) Not applicable
Maximum PIN length in digits Not applicable
Degraded mode settings Not applicable

1 Sharp cameras can be added from the unit from the Synergis™ Appliance Portal.