Supported Synergis™ appliance features for Allegion Schlage IP lock integration with Synergis™ Softwire 10.11 - Synergis™ Softwire 10.11

Synergis™ Softwire Integration Guide 10.11

series
Synergis™ Softwire 10.11
revised_modified
2020-06-26

Not all Synergis™ appliance features are supported with the integration of Allegion Schlage IP locks.

Allegion Schlage IP locks are connected to the Synergis™ appliance through an ENGAGE Gateway.
Synergis™ Appliance Portal and firmware features Supported
Hardware configuration (pre-staging capability)  
Manual enrollment (Add hardware dialog box) Yes
Automatic enrollment (Scan button) No
Property configuration No
Configuration cloning (Clone button) No
I/O diagnostics (live monitoring of inputs, relays, and readers) Yes
Interface module firmware display Yes
Interface module firmware upgrade Yes
Double-badge activation Not applicable
Access control behavior (Synergis™ unit-wide settings)1  
Lock relay (After door opens or When door closes) No
Interlock setting (Single door unlock or Single door open) Not applicable
Do not generate Door open too long events when door is unrestricted Not applicable
Reader setting (Card or PIN or Card only) Not applicable
Maximum PIN length in digits Not applicable
Degraded mode settings Not applicable

1 The door behavior settings are overwritten by the individual door settings configured in Security Center.