Configuration overview for Assa Abloy IP locks with Synergis™ Master Controller 10.11 - Synergis™ Softwire 10.11

Synergis™ Softwire Integration Guide 10.11

series
Synergis™ Softwire 10.11
revised_modified
2020-06-26

To configure Assa Abloy IP locks to work with a Synergis™ unit, you must first configure the locks with the Lock Configuration Tool (LCT), and then pair the locks to the Synergis™ unit using the Synergis™ Appliance Portal.

The following table summarizes the IP lock configuration process.
Phase Description See
1 Make sure your IP lock firmware is up to date and supported by Synergis™ Softwire 10.11.
2 Configure the IP lock using the LCT.
  • Configure the Host address of the IP lock to be the same as the IP address of the Synergis™ unit.
  • Configure the communication port of the IP lock that the Synergis™ unit will use as a listening port when discovering the locks (Default=2571).
  • If encryption is required, set the AES key in the lock profile. You need this key after you pair the IP lock with the Synergis™ unit.
  • Network & Lock Configuration Tool User Manual that came with your lock.
3 Establish communication between the Synergis™ unit and its connected IP locks in Synergis™ Appliance Portal.

Watch this video to learn more. Click the Captions icon (CC) to turn on video captions in one of the available languages. If using Internet Explorer, the video might not display. To fix this, open the Compatibility View Settings and clear Display intranet sites in Compatibility View.