Supported Aperio-enabled locks in Synergis™ Softwire 10.11 - Synergis™ Softwire 10.11

Synergis™ Softwire Integration Guide 10.11

Synergis™ Softwire 10.11

For Aperio integration, the Synergis™ unit connects to the Aperio-enabled locks through a communication hub that is connected either over IP or to one of its RS-485 channels. Each Aperio-enabled lock is viewed as an interface module.

Synergis™ Softwire 10.11 supports the following Aperio-enabled devices:
Model Description Platform release Certification
A100 Keyless entry control   Supported by design
AH30 Wireless communication hub. Each hub controls up to 8 Aperio devices. 3.4.0 (v3)1



Supported by design

AH40 Wireless communication hub that connects to the Synergis™ unit over IP. Each hub controls up to 16 Aperio devices, for a total of 64 devices per Synergis™ unit. Powered by PoE or power supply. 3.7.1 Certified
AS100 Door position sensor   Supported by design
C100 Single- or double-knob cylinder lock (European model)1 2.6.4 Supported by design
E100 Standard escutcheon RFID reader (European model) 3.7.0 Supported by design
G100 Digital glass door lock   Supported by design
H100 Access control handle (European model)   Supported by design
IN100 v3 v3 lock 3.5.02 Certified
IN100 Cylinder or mortise lock 3.5.0 Certified
K100 K100 Cabinet Lock 2.6.1 Supported by design
KS100 KS100 Server Cabinet Lock   Supported by design
L100 Electronic lock RFID-Reader (European model) 3.6.0 Supported by design
M100 Wire-free retrofit mortise   Supported by design
PR100 HF/LF P100 high and low frequency locks 2.6.6 Supported by design
R100 Surface-mounted wireless reader 2.8.1 Supported by design

1 The double-knob C100 is two locks, and can be configured as a door with two strikes.

2 The minimum supported version for AH30 to work with IN100 v3 locks is 3.2.0.