Adding Fiber SenSys perimeter sensors as tracking systems to Security Center - Restricted Security Area Surveillance 3.5

Restricted Security Area Surveillance Plugin Guide 3.5

series
Restricted Security Area Surveillance 3.5
revised_modified
2020-07-06

To monitor the restricted areas secured by your tracking system in Security Center, you must add the Fiber SenSys system as a tracking system entity in Config Tool.

Before you begin

  • Confirm that the tracking system and its perimeter sensors are configured and functioning properly.
  • Confirm that the plugin role is configured and communicating with the tracking system.
  • (Optional) Add custom events in Security Center.
  • Create a georeferenced map in Security Center.

    For more information, see the Security Center Administrator Guide.

  • Ensure that a sufficient number of perimeter system licenses is available from Restricted Security Area Surveillance role > Properties > Licenses.

Procedure

  1. From the Config Tool home page, open the Area view task.
  2. Click Add an entity (), and then select Tracking system.
  3. On the Tracking system information page of the wizard, enter the following information:
    Type
    Select Fiber SenSys.
    Name
    Enter a unique name for this tracking system.
  4. On the Communication page, enter the following information:
    IP address
    The IP address of the server that hosts the tracking system's API software.
    Port
    The TCP/IP port that the plugin and the tracking system uses to communicate.
    NOTE: By default, Fiber SenSys uses port 10001.
  5. Click Refresh connection status () to connect.
  6. When the connection is Online, click Next page ().
  7. On the Specific configuration page, specify the duration of the delay before the alarm is automatically acknowledged. The default value is five seconds.
  8. On the RSA configuration page, enter the following information:
    Events
    Turn on the custom events you want to monitor for this tracking system.
    NOTE: You can modify this later on the Properties page of the tracking system.
    Perimeter configuration
    Choose the colors for the perimeter when it is Armed, Disarmed, and when a System warning is reported.
    Change color on intrusion
    Turn on this option if you want the perimeter to change color when an intrusion is detected, and then choose the color for the perimeter.
  9. Click Finish.
    The system and its devices are listed in the Area view entity tree.

After you finish

Create RSA zones.