Adding Future Fibre Technologies perimeter intrusion detection systems as tracking systems to Security Center - Restricted Security Area Surveillance 3.5

Restricted Security Area Surveillance Plugin Guide 3.5

series
Restricted Security Area Surveillance 3.5
revised_modified
2020-08-27

To monitor the restricted areas secured by your tracking system in Security Center, you must add the Future Fibre Technologies (FFT) system as a tracking system entity in Config Tool.

Before you begin

  • Confirm that the tracking system and its perimeter sensors are configured and functioning properly.
  • (Optional) Position cameras for each zone so that they have a view of the restricted area and make sure that the cameras are functioning properly.
  • (Optional) Add custom events in Security Center.
  • Create a georeferenced map in Security Center.

    For more information, see the Security Center Administrator Guide.

  • Ensure that a sufficient number of perimeter system licenses is available from Restricted Security Area Surveillance role > Properties > Licenses.

What you should know

By default, the FFT perimeter intrusion detection system communicates over TCP/IP port 80.

Procedure

  1. From the Config Tool home page, open the Area view task.
  2. Click Add an entity (), and then select Tracking system.
  3. On the Tracking system information page of the wizard, enter the following information:
    Type
    Select Future Fibre Technologies.
    Name
    Enter a unique name for this tracking system.
  4. On the RSA configuration page, enter the following information:
    Import on map
    Select the map that you want to use to display the devices in Security Center.
    Events
    Turn on the custom events you want to monitor for this tracking system.
    NOTE: You can modify this later on the Properties page of the tracking system.
    Perimeter configuration
    Choose the colors for the perimeter when it is Armed, Disarmed, and when a System warning is reported.
    Change color on intrusion
    Turn on this option if you want the perimeter to change color when an intrusion is detected, and then choose the color for the perimeter.
  5. Click Finish.
    The system and its devices are listed in the Area view entity tree. The perimeters you configured using the FFT CAMS application are automatically imported onto the map in Security Center.

After you finish