Enabling automatic fusion of targets in the RSA Surveillance role - Restricted Security Area Surveillance 3.5

Restricted Security Area Surveillance Plugin Guide 3.5

series
Restricted Security Area Surveillance 3.5
revised_modified
2020-08-27

When automatic fusion is enabled, the RSA Surveillance plugin identifies two targets that represent the same intruder and merges the targets into one. An automatic fusion occurs when two targets are within the specified distance from each other.

What you should know

A single target might be detected as multiple separate targets in the following cases:
A tracking device loses the target for a period of time, then detects the target
If a target is hidden from the tracking device for an extended time, for example, by going behind a building, when the target reappears, the tracking device might detect it as a new target.
Multiple tracking devices detect the same target
If you have different types of tracking devices in the same zone, such as radar, laser, and thermal detectors, each device might detect the same target.

Procedure

  1. From the Config Tool home page, open the Plugins task.
  2. Select the Restricted Security Area Surveillance role, and then click the Properties tab.
  3. In the Auto fusion section, set State to ON.
  4. From the Sensitivity list, select one of the following settings:
    Low
    Two targets are merged when they are less than 5 meters (16.4 feet) apart.
    Medium
    Two targets are merged when they are less than 2.5 meters (8.2 feet) apart.
    High
    Two targets are merged when they are less than 1 meter (3.3 feet) apart.
    Custom
    Enter the maximum distance that two targets can be from each other for them to be merged.
    Dynamic
    Two targets are merged, based on their speed and time of detection. The required distance between two targets is dynamic.
  5. Click Apply.