SharpOS 11.8 Portal - Configuration page: Image feed port (Advanced mode only) - SharpOS 11.8

Sharp Administrator Guide 11.8

SharpOS 11.8

In the Image feed port section of the Sharp Portal Configuration page, you can set up port forwarding to see each Sharp's live video feed. This section is only visible if you logged on to the Sharp Portal in Advanced mode.

Image feed port
If your AutoVu™ configuration includes two or more fixed Sharp units connected to the network through a router, you can use port forwarding to see each Sharp’s live video feed.
Example: If you connect five Sharps to a router, and then connect the router to your network, you need to specify a different image feed port for each Sharp. A maximum of 32 ports are available for port forwarding (ports 4502 to 4534).