Sharp Portal Configuration page: InputsSharpOS 11.8 Portal - Configuration page: Inputs - SharpOS 11.8

Sharp Administrator Guide 11.8

series
SharpOS 11.8
revised_modified
2020-04-22

In the Inputs section of the Sharp Portal Configuration page, you can view the status of the SharpX LPR Processing Unit inputs that are used for tire imaging.

NOTE: For SharpX installations where LPR Processing Unit input/output control is required, you must also enroll the LPR Processing Unit under the Archiver.
Name
Letter of the input.
Current Status
Shows whether the input on the LPR Processing Unit is currently in an “on” or “off” state. When the input is in an “on” state, it is detecting a voltage higher than 4.5 V. When the input is in an “off” state, it is detecting a voltage that is 2.5 V or less.