Default IP addresses of LPR Processing Units - SharpOS 11.8

Sharp Administrator Guide 11.8

series
SharpOS 11.8
revised_modified
2020-04-22

All SharpX LPR Processing Units have several internal components. Each component has a factory-assigned static IP address.

The following table shows the default IP addresses of each of these components.
Component Default IP address
Single Board Computer 1 (SBC1) 192.168.10.1
Single Board Computer 2 (SBC2) 192.168.10.2
Genetec Video Processor 1 (GVP1) Reserved
Genetec Video Processor 2 (GVP2) Reserved
Camera Unit 1 (CAMU1) 192.168.10.5
Camera Unit 2 (CAMU2) 192.168.10.6
Processing Unit Management Controller (MPU) 192.168.10.7
Camera Unit 3 (CAMU3)1 192.168.10.8
Camera Unit 4 (CAMU4)1 192.168.10.9
Navigation (NAV)2 192.168.10.10

1 For SharpX X2S/X2SU with four camera ports.

2 The "NAV" IP address only applies to LPR Processing Units that include the AutoVu Navigation Option.