SharpOS 12.7 Portal - Overview page - SharpV | SharpOS 12.7

AutoVu Handbook for SharpV Fixed Installations 12.7

series
SharpV | SharpOS 12.7
revised_modified
2019-08-21

The Overview page is available from the Dashboard menu. Use the Overview page to view general information about the SharpV, such as serial number, license, IP address, input and output status, and so on.

SharpV (XYZ)

Use the section with the name of your SharpV to view general information about it.

Serial number
Displays the SharpV hardware serial number.
License
Displays if the SharpV license is valid, invalid, or missing.
Inputs
Shows the inputs on the SharpV and whether the input is in a high or low state. When the input is in a high state, it is detecting a voltage of 5.75 V or higher. When the input is in an “low” state, it is detecting a voltage of 4.80 V or lower.
Outputs
Shows the SharpV outputs (two dry type, solid-state (transistor) polarized outputs) and whether the output is in a high or low state. When the output is in a high state, the output is open. When the input is in an low state, it is closed. SharpV.
Test outputs
Click to toggle your configured output between low and high to validate the configuration.
Mac address
Displays the MAC address of the SharpV. This information might be requested if you contact technical support.
Type
Displays the type of SharpV unit.
Illuminator
Displays the illuminator information on the SharpV.
Platform
Displays the software image installed on the SharpV. If you contact technical support, you will be asked to provide this number.
Version
Displays the SharpOS package version. Click Details for more information about the versions of the services included in the package. You can use this information to confirm that your SharpV is up to date.
Camera
Displays the resolution and the lens focal range available for context camera images and LPR camera images.
NOTE: Information on context cameras is not applicable to SharpV ITS cameras.
Location
Displays the coordinates of the SharpV camera (the camera's position must be configured in Security Center). Locate on map displays the camera's position on a map.

Connectivity

Use the Connectivity section to view information about the internet connectivity and whether or not the SharpV is connected to Security Center.

IP address
Displays the IPv4 and IPv6 address of the SharpV.
Security Center
Displays whether the SharpV is connected to Security Center or not.
NOTE: This field is only displayed if you choose to send your LPR data to Security Center on the Extension page.
Internet
Displays whether the SharpV is connected to the Internet or not.
Video streams
If the SharpV has been added to the Security Center Archiver and is being used to monitor video, then the camera name, client IP address, frame rate, and encoding format are listed for each stream.

Storage and usage

Use the Storage and usage section to view information about reads stored on the SharpV, CPU usage, and memory usage. Indicator lines are provided so you can see the status. Indicator lines are usually green or orange. A red indicator line either indicates that there is a problem, or indicates high CPU activity.

Reads stored
Indicates the reads stored in the database of the SharpV (in bytes). The number of reads is also displayed.
Memory
Displays the memory drives, and indicates each drives's memory usage in gibibytes (GiB).
CPU (Total)
Indicates the total CPU usage of the SharpV. Click Show details to see the usage for each CPU.

Last activities

Unit rebooted
Indicates the last time the unit was restarted.
Software restarted
Indicates the last time the PlateReader software was restarted.