Hardware components for SharpV fixed installation - SharpV | SharpOS 12.7

AutoVu Handbook for SharpV Fixed Installations 12.7

series
SharpV | SharpOS 12.7
revised_modified
2019-08-21

Before installing a SharpV system, it is recommended that you familiarize yourself with the hardware components used in a typical installation.

  Component What you should know
A SharpV: Input / output connection The SharpV includes two inputs and two outputs (I/O). You can configure the SharpV to use an input signal to trigger a license plate read. For more information, see SharpV input/output cable termination.
B SharpV: Network cable connection The SharpV connects to the network, using a standard CAT5e network cable (not included). For more information, see Network cable requirements for SharpV cameras.
C Mounting bracket A Videotec WBJA (white) or WBJF (black) mounting bracket is included with the SharpV. For a list of compatible mounting brackets, see Available Videotec mounting brackets.
D Input / output control Using the SharpV's inputs and outputs, you can configure Security Center to control an entry point based on a valid license plate read. For more information, see SharpV input/output cable termination.
E PoE+ power Power is supplied to the SharpV through the network cable, using PoE+. For more information, see Network cable requirements for SharpV cameras.
NOTE: PoE+ provides a maximum of 25.5 W of power, compared to the 13.0 W provided by standard PoE.