SharpOS 12.7 Portal - Network page - SharpV | SharpOS 12.7

AutoVu Handbook for SharpV Fixed Installations 12.7

series
SharpV | SharpOS 12.7
revised_modified
2019-08-21

The Network page is available from the Configuration menu. Use the Network page to configure the SharpV to use Dynamic Host Configuration Protocol (DHCP) or a static IP address.

IPv4 network settings

NOTE: DHCP is used by default if no option is selected.
Use DHCP
Select this option to connect the SharpV to a DHCP server, which assigns the required IP address. On a network with DHCP and DNS servers, you can connect to the SharpV using the SharpV name (for example, SharpV1234) rather than the IP address (for example, 192.186.10.100).
Use static IP address
Select this option to use a static address for the SharpV.
IMPORTANT: You must use a static IP address if you want to stream video to the Security Center Archiver role.

You can modify the following:
  • IP address
    Type the new IP address you want to assign to the SharpV. The default is 10.0.0.1.
  • Subnet mask
    Type the new Subnet mask if applicable. The default is 255.255.0.0.
  • Gateway
    Type the new Gateway if applicable. The default is 10.0.0.0.
  • DNS
    Type the new DNS if applicable. The default is 10.0.0.0.