Discovering units on your network - Security Center 5.8

Security Center Administrator Guide 5.8

series
Security Center 5.8
revised_modified
2020-08-17

If you do not know the IP address of the video or access control unit you want to add, you can find the unit on your network using the Unit enrollment tool.

Before you begin

If you want to discover an access control unit, read Adding access control unit extensions.

Procedure

  1. From the home page, click Tools > Unit enrollment.
  2. Configure your unit enrollment settings.
  3. Click Save > Start discovery ().
    The units discovered on your network are listed, using the enrollment settings you configured for each manufacturer. You can stop the discovery process at any time.