Defining user levels for controlling PTZ motors - Security Center 5.8

Security Center Administrator Guide 5.8

series
Security Center 5.8
revised_modified
2020-08-17

You can select which users or user groups have priority to control different PTZ cameras, by overriding their general user level for specific areas or cameras.

What you should know

By default, priority to control PTZ cameras is determined by a user’s general user level, which is set individually or inherited by their parent user group. However, user level overrides take precedence over their general user level. You can create an override for PTZ controls by area or camera. If you override a user level for an area, it applies to all PTZ cameras in that area.

Setting user level overrides for PTZ controls is helpful if you have multiple user groups who all have access to the same cameras.

Procedure

  1. From the Config Tool home page, open the User management task.
  2. Select the user or user group to configure, and click the Properties tab.
  3. Set the User level option to Override, and then click Configure PTZ overrides.
  4. In the User level overrides dialog box, click Add an item ( ).
  5. Select the camera or area to create the override for, and click OK.
  6. In the Override value column, select a user level that applies to the camera or area.
  7. Click Save > Apply.
    Paul is a member of the Operator user group in his company, and he is in charge of monitoring the third floor of their building. As part of the Operator user group, by default he has a user level of 20. Because he is in charge of monitoring the third floor, he needs to have the highest priority to control all the PTZ cameras on that floor. Therefore, a user level override with the value of 1 is created for him for the third floor.