Server Admin - Main server page - Security Center 5.8

Security Center Administrator Guide 5.8

series
Security Center 5.8
revised_modified
2020-08-17

The Server Admin - Main server page lets you configure your Directory database and the settings pertaining to your main server.

Actions

Click the Actions drop-down list beside the server name to see what actions can be applied to the main server.
The available actions are:
Directory
Start/Stop
Start or stop the Directory.
Restart
Restart the Directory.
Deactivate
Convert the main server to an expansion server.
Genetec™ Server
Console
Open the Debug Console page (reserved for Genetec™ Technical Support Engineers).
Restart
Restart the Genetec™ Server service. This action renders the server temporarily unavailable.

Directory

The Directory section shows the status and settings of the Directory database. The Directory database contains all system and entity configurations, the incident reports, and the alarm history.
NOTE: If you accessed Server Admin from Config Tool instead of through a web browser, you do not see the database commands (upgrading or restoring the database) because you are still connected to the Directory. You cannot modify the Directory database while you are still connected to it.
Database server
Name of the SQL Server service. The value (local)\SQLEXPRESS corresponds to Microsoft SQL Server 2014 Express Edition installed by default with Security Center Server.
Database name
Name of the database instance (default = Directory).
Actions
Maintenance functions you can perform on the Directory database:
Create database ()
Create a new database.
Delete database ()
Delete the database.
Database properties ()
Opens a dialog box showing the database information, and the automatic Backup and Email notification settings.
Show progress ()
Opens a dialog box showing the past and current actions being performed on the database.
Update database ()
Upgrade the database schema to the current version.
Resolve conflicts ()
Resolve conflicts for imported entities.
Backup/restore ()
Opens a dialog box allowing you to back up or restore the Directory database.
Authentication
Specifies which SQL Server authentication is to be used:
Windows
(Default) Use Windows authentication when the role server and the database server are on the same domain.
SQL Server
Use SQL Server authentication when the role server and the database server are not on the same domain. Mandatory for Azure SQL Database. You must specify a username and password in this case.
Database security
Security options for communication between the role and its database server.
Encrypt connections
(Default) Uses Transport Layer Security (TLS) protocol for all transactions between the role and the database server. This option prevents eavesdropping and requires no setup on your part.
Validate certificate
Authenticates the database server before opening a connection. This is the most secure communication method and prevents man-in-the-middle attacks. The Encrypt connections option must first be enabled.
NOTE: You must deploy a valid identity certificate on the database server. A valid certificate is one that is signed by a certificate authority (CA) that is trusted by all servers hosting the role and that is not expired.
Keep incidents
Specifies how long the incident reports are kept in the Directory database.
Keep audit and activity trails
Specifies how long the entity configuration history and the activity history are kept in the Directory database.
Keep alarms
Specifies how long the alarm history is kept in the Directory database.
Auto ack alarms after
Lets the system automatically acknowledge all active alarms that do not get acknowledged before the specified time (default = 72 hours). When turned on, this option supersedes the Automatic acknowledgment option configured for each individual alarm. When the automatic acknowledgment of alarms is turned on at both the system and individual alarm level, it is the shortest delay that applies.
Run macros with limited access rights
Runs macros in a subprocess with limited access to the Directory host OS to protect the system from malicious macro execution.
Indicate how you want your system data to be collected
You can change your data collection preference selected at system installation. The options are:
Do not collect data
No data is collected for product improvement.
Collect data anonymously
System data are collected and shared with Genetec Inc., but all data that identify your company are first removed.
Collect and link data to your system ID
System data are linked to your system ID and shared with Genetec Inc. to facilitate proactive support and improve communication.

Network

Use this section to configure the network card and the TPC listening port used by the Genetec™ Server service.
HTTP port
Port used by the Genetec™ Server service to listen to commands received from other Security Center servers on the public address.
Secure HTTP port
Port used by Genetec™ Server service for secured HTTP connections.
Private address
List of private addresses corresponding to the network interface cards (NIC) installed on this server. Only select the ones that are used for the communication between Security Center applications.
Private port
Port used by the main server to listen to incoming connection requests, and by all servers for communication between themselves, on the private IP address. (default = 5500).
NOTE: If you change this port on the main server, then all users must specify the new port number after the Directory name in the Logon dialog box, separated by a colon (:). This applies to all expansion servers. You must specify the new port number after the Security Center Directory name in Server Admin, in the Main server connection section.
Legacy port
Port used by the Genetec™ Server service to listen to commands received from servers running an older version of Security Center (default = 4502).
Public address
Public address of the server.
Use IPv6
Use IPv6 for video streaming and communication between servers (only if your network supports it).
Proxy
Select this option if the server is used as the proxy server for a private network protected by a firewall.

Secure communication

Use this section to view the current identity certificate used by the server to communicate with other Security Center servers.
Issued to
Subject of the current certificate. A self-signed certificate created at software installation appears in the form GenetecServer-{MachineName}.
Issued by
Name of the certificate authority (CA) that issued the certificate. The issuer and the subject are the same for self-signed certificates.
Valid from/Expiration
Validity period of the current certificate.
Select certificate (button)
Dialog box listing all certificates installed on this machine. You can use this dialog box to change the certificate used for this server.
Allow application starting from version (backward compatibility)
To increase system security, limit backward compatibility to your current version (5.8). Select an older version if you have expansion servers running older versions in your system.