Adding privacy settings to hotlists - Security Center 5.8

Security Center Administrator Guide 5.8

series
Security Center 5.8
revised_modified
2020-08-17

To obscure license plate numbers, or exclude plate, context, or wheel images from reads and hits that are received in Security Center from a specific hotlist, you can set the hotlist as private.

Before you begin

You must obtain a special DLL file from Genetec Inc. For more information, contact your Genetec Inc. representative.

What you should know

If you add privacy settings to a hotlist, Security Center keeps the LPR data (for example, plate numbers, GPS coordinates, date/time, and so on), but disassociates that data from the hotlist that generated the hit. For example, if Genetec Patrollerâ„¢ generates a hit from a hotlist called "StateWideFelons", you can keep all the LPR data on that hit, but you won't be able to see that the matched license plate was on the "StateWideFelons" hotlist.

The privacy settings of specific hotlists take precedence over the global privacy settings configured at the LPR Manager level. However, it is best practice to turn off all the privacy settings at the LPR Manager level to avoid conflicts.

Procedure

  1. Copy the DLL file you received from Genetec Inc. to the Security Center root folder (for example, C:\Program Files\Genetec Security Center 5.8).
  2. Restart the Directory role from Server Admin, as follows:
    1. Open Internet Explorer.
    2. In the address bar, type http://server IP address:port/Genetec and press Enter.
    3. Log on to Server Admin.
    4. Under Directory status, click Restart.
  3. From the Config Tool home page, click LPR > General settings > Applications.
  4. Under Privacy, turn OFF all the settings.
  5. Click Apply.
  6. From the home page, click LPR > Hotlists.
  7. Select the hotlist that you want to make private, and then click the Identity tab.
  8. In the Logical ID field, enter the value 5000.

    This marks the hotlist, and tells Security Center to make the LPR data private.

  9. Click Apply.

After you finish

Repeat for as many hotlists as you want.