Virtual zone configuration tabs - Security Center 5.8

Security Center Administrator Guide 5.8

series
Security Center 5.8
revised_modified
2020-08-17

Virtual zones are controlled by the Zone Manager role. Virtual zones are used to combine inputs and trigger outputs that belong to different units of different types. Virtual zones can be armed and disarmed from Security Desk or using Arm zone and Disarm zone actions.

Virtual zone - Properties tab

Click the Properties tab to configure the inputs that define this zone, and define how they are evaluated.
Zone Manager
Zone Manager role that controls the virtual zone.
Inputs
Inputs combined to evaluate the zone state.
Operator
Logical operator used to combine the input states to evaluate the zone state.
Associated events
Events representing the zone states. Select None if a zone state should be ignored.
Normal state
When the combination of inputs yields a zero (0).
Active state
When the combination of inputs yields a one (1).
Trouble state
Requires to have at least one supervised input. The zone is in the Trouble state when at least one of the input is in the Trouble state. The Trouble state supersedes all other states.
Reactivation threshold
The time period during which the same event should not be re-triggered.

Virtual zone - Arming tab

Click the Arming tab to configure the arming source of your zone and its arming behavior.
Arming source
Select the schedules corresponding to the periods when the zone is armed.
Delays
Optional delays that give you time to leave the premises after arming the zone, and time to disarm the zone after tripping a sensor.
Arming delay
Duration (mm:ss) you want between the time the zone is armed and the time the event triggers become active.
Entry delay
Duration (mm:ss) you want between the time the entry sensor is tripped and the time the events are triggered. This option allows you to disarm the zone before triggering the output relays.