Configuring a different retention period for the secondary Archiver server - Security Center 5.8

Security Center Administrator Guide 5.8

series
Security Center 5.8
revised_modified
2020-08-17

You can set a different retention period for the secondary Archiver server (used for failover or redundancy) to manage more precisely the amount of data storage. You can configure this setting in the Archiver.gconfig file.

What you should know

  • A redundant or secondary Archiver server can have a smaller or a larger retention period than the primary Archiver server.
  • If no value is specified for the secondary Archiver server, or if the value is equal to zero, the retention period of the primary Archiver server is applied.
  • If a custom retention period is configured for a given camera, the Archiver configuration is ignored for that camera.
  • The configuration for the redundant retention period does not apply to archive backups.
  • The new default retention period of the secondary Archiver is a role configuration. Both the primary and secondary archiving computers must have the same configuration file.

Procedure

  1. Open the \<Installation directory>\Configuration Files\Archiver.gconfig.
    The Security Center installation directory can be found (by default) at the following location: C:\Program Files (x86)\Genetec Security Center 5.x.
  2. Set the DefaultRetentionPeriodForSecondaryArchver value to the number of days you want to retain the secondary recordings.
    For example: <ArchiverRole DefaultRetentionPeriodForSecondaryArchiver="1" /> sets the secondary retention period to one day.
  3. Save the file.
  4. Restart the Archiver process to apply the changes.