Turning Sharp cameras on and off - Genetec Patroller™ 6.5

Genetec Patroller™ University Parking Enforcement User Guide 6.5

Applies to
Genetec Patroller™ 6.5
Last updated
2020-05-19
Content type
Guides
Guides > User guides
Language
English
Product
Genetec Patroller™
Version
6.5

If you have more than one Sharp camera installed on your vehicle, you can select which cameras are activated using Genetec Patroller™. You can also use the AutoVu™ car camera switch to activate the cameras, if the switch is installed in the vehicle.

What you should know

If you have only one camera, you can use the Pause/Resume button in the Genetec Patroller™ main window to turn it on or off.

Procedure

To turn Sharp cameras on and off in Genetec Patroller™:

  1. From the Genetec Patroller™ main window, do one of the following, depending on how Genetec Patroller™ is configured:
    • If you only have cameras installed on the front of the vehicle: tap Left (), Right (), or Both () to turn on the corresponding Sharp camera.

      You’ll know which Sharp is active by the icon displayed. For example, if you see Both (), it means that both cameras are on and reading plates.

    • If you have cameras installed on both the front and rear, or just the rear of the vehicle: tap Cameras.
    The Cameras window opens, and you can turn any of them on or off. In the following example, only two cameras are shown (front-right and rear-left).

To turn Sharp cameras on and off using the AutoVu™ car camera switch:

  1. Use the right and left toggle switches to activate or deactivate the right and left Sharp cameras.
    The AutoVu™ car camera switch also includes LED lights to inform you of the current camera activation (red) and to show system power (blue).